Laserfiche WebLink
THE CITY OF SUNNY ISLES BEACH <br />PROJECT NO. 21-1011 <br />BUILDING DEPARTMENT RELOCATION TO ANNEX <br /> <br />Project No. 21-1011 November 2024 084413 Glazed Aluminum Curtain Walls-4 <br />D. Dimensional Tolerances: Provide glazed aluminum curtain wall system, including <br />anchorage, that accommodates dimensional tolerances of building frame and other <br />adjacent construction. <br /> <br />1.5 WARRANTY <br /> <br />A. Glazed Aluminum Curtain Wall Warranty: Submit a written warranty, executed by the <br />glazed aluminum curtain wall manufacturer, agreeing to repair or replace curtain wall units <br />that have fail in material or workmanship within the specified warranty period. <br /> <br />B. Warranty Period: <br /> <br />1. Ten years warranty on finish. <br /> <br />2. Five-year warranty on weather tightness of installation: Air, water and structural <br />adequacy of units, and sealants within installation. <br /> <br />C. Warranty shall not deprive the Owner of other rights or remedies that the Owner may have <br />under other provisions of the Contract Documents and is in addition to and runs concurrent <br />with other warranties made by the Contractor under requirements of the Contract <br />Documents. <br /> <br /> 1.6 MOCK-UPS: <br /> <br />A. Before installing the curtain wall system, erect a full-size sample mock-up of type required, <br />including mullions, vision glass, and other elements of the system, to verify selections made <br />under sample submittals and to represent the completed system for aesthetic effects and <br />qualities of materials and installation. Build the mockups to comply with the following <br />requirements, using materials indicated for the final installation: <br /> <br />1. Construct the mockups on site in the location and sizes as directed by the <br />Architect/Engineer. <br /> <br />2. Demonstrate the proposed range of aesthetic effects and workmanship. <br /> <br />3. Obtain Architect/Engineer=s acceptance of the mock-up before commencing final <br />erection of the glazed aluminum curtain wall system. <br /> <br />4. The mock-ups may become part of the completed Work if maintained in an <br />undisturbed condition and approved by the Architect/Engineer. <br /> <br />PART 2 - PRODUCTS <br /> <br />2.1 MANUFACTURERS <br /> <br />A. Acceptable Manufacturers: <br /> <br />1. Alumiglass, Inc. <br /> <br />2. Kawneer Company.