|
William H. Green III, PE
<br />Waterfront Engineer / Diver (ADCI)
<br />William Green is a waterfront engineer / diver with experience in residential / commercial
<br />structural design on inland and waterfront structures.
<br />PROJECT EXPERIENCE
<br />Facility Inspection, PhilaPort Pier 122, Philadelphia, PA. Performed an inspection of
<br />precast prestressed concrete piles and steel piles above and below water. The data gathered
<br />was used to give a structural assessment of the facility to the client. (2024)
<br />Facility Inspection, South Jersey Port – Camden – Berth 1, Camden, NJ. Performed
<br />an above / below water inspection of a timber framed low-level relieving platform where
<br />a portion had collapsed. The purpose of the inspection was to clearly define repair limits
<br />surrounding the collapse and evaluate the capacity of the remaining structure. (2024)
<br />Post Construction Inspection, Massachusetts Maritime Academy, Bourne, MA. Performed
<br />an underwater inspection of the newly refurbished pier at Mass Maritime to ensure it is in
<br />compliance with GEI’s drawings before construction was closed out. (2024)
<br />Facility Inspection, Brooklyn Cruise Terminal, New York, NY. Performed an inspection
<br />on multiple elements above and below water at the Brooklyn Cruise Terminal in Brooklyn
<br />NY, including but not limited to revetments, steel sheet pile bulkheads, timber piles, and
<br />concrete encased timber bulkheads. The data gathered was given to the primary contractor,
<br />Colliers Engineering & Design. (2024)
<br />Facility Inspection, Conley Shipping Terminal – Berth 17, Boston, MA. Performed an
<br />above and below water inspection of multiple elements of Berth 17 in the Conley Terminal.
<br />Inspection elements included timber piles, concrete decking, mooring fixtures and steel piles.
<br />The data gathered was used to evaluate the wharf for a submarine commencement ceremony
<br />and determine what repairs are required to host the submarine. (2024)
<br />Mooring Analysis, Kiewit / Austal Shipyard, Mobile, AL. Performed mooring analyses for
<br />a proposed ship lift in Mobile Alabama. Criteria for mooring was strict due to the high risk of
<br />hurricanes in the area. The mooring analysis estimated loads the structure will be exposed to
<br />given the weather conditions and ship characteristics. The output loads were used as a basis
<br />of design for the ship lift. (2024)
<br />Facility Inspection, Erie Basin, New York, NY. Performed an inspection on multiple
<br />elements above and below water at the Erie Basin in Brooklyn, NY including but not limited to
<br />revetments, steel sheet pile bulkheads, timber piles. The data gathered was used to provide
<br />repair recommendations to the client. (2023)
<br />Facility Inspection, Seagirt Marine Terminal, Baltimore, MD. Performed an above water
<br />/ below water inspection on a concrete low level relieving platform. The data gathered was
<br />used to give a structural assessment of the facility to the client. (2023)
<br />Facility Inspection, Boston Harbor Islands, Boston, MA. Performed above water / below
<br />water inspections of the ferry landing structures at Grape, Bumpkin, Lovells, Gallops,
<br />Georges, Spectacle, Peddocks, and Little Brewster Islands. The ferry landings included timber
<br />pile and concrete pile supported piers, barges, gangways, revetments, and retaining walls.
<br />The data gathered was used to give a structural assessment of the facilities to the client.
<br />(2022)
<br />Cost Estimation, Newburyport Wharf, Newburyport, MA. Provided a cost estimate for a
<br />full bulkhead / wharf replacement to the Town of Newburyport MA so they can secure FEMA
<br />funding. (2022)
<br />Fender Design, Massachusetts Maritime Academy, Bourne, MA. Designed a fender system
<br />as part of the larger pier renovation project. Performed calculations to determine the size
<br />of the fender required to withstand the applied ship loading and performed calculations to
<br />ensure the fender itself has sufficient capacity to withstand these loads. (2022)
<br />EDUCATION
<br />M.S., Structural Engineering,
<br />University of Massachusetts,
<br />Amherst
<br />B.S., Civil Engineering, University
<br />of Massachusetts, Amherst A
<br />Entry Level Diver Tender,
<br />Minnesota School of Diving
<br />INDUSTRY/GEI EXPERIENCE
<br />5 years/3 years
<br />REGISTRATIONS & LICENSES
<br />Professional Engineer, MA
<br />TRAINING AND CERTIFICATIONS
<br />OSHA 10
<br />CPR/AED & First Aid
<br />Entry Level Diver / Tender (ADCI)
<br />FAA Part 107 Certified (Drone)
<br />GEI Consultants | City of Sunny Isles Beach | RFQ 26-07-01 88
|