Laserfiche WebLink
SAMSON OCEANFRONT PARK <br />CITY OF SUNNY ISLES <br />TECHNICAL SPECIFICATIONS <br />PORTLAND CEMENT PLASTER 092423-1 <br /> <br />SECTION 092423 - PORTLAND CEMENT PLASTER <br /> <br />PART 1 - GENERAL <br /> <br />1.01 <br /> <br />SECTION INCLUDES: <br />A. Portland cement plaster system (stucco) to be installed at concrete and <br />masonry repair areas and where existing stucco has become delaminated. <br /> <br />1.02 <br /> <br />RELATED SECTIONS: <br />A. Section 03732 - Concrete Repair. <br /> <br />1.03 <br /> <br />REFERENCES: <br />A. ASTM C150 - Portland Cement. <br /> <br />B. ASTM C926 - Application of Portland Cement Based Plaster. <br /> <br />C. Florida Building Code. <br /> <br />1.04 <br /> <br />SUBMITTALS: <br />A. Submit under provisions of Section 01300. <br /> <br />B. Product Data: Provide data on plaster materials, characteristics and limitations <br />of products specified. <br /> <br />1.05 <br /> <br />QUALITY ASSURANCE: <br />A. Perform Work in accordance with ASTM C926 and Florida Building Code <br />Standards. <br /> <br />B. Maintain one copy of each document on site. <br /> <br />1.06 <br /> <br />QUALIFICATIONS: <br />A. Applicator: Company specializing in performing the work of this section with <br />minimum five years documented experience. <br /> <br />1.07 <br /> <br />ENVIRONMENTAL REQUIREMENTS: <br />A. Do not apply plaster when substrate or ambient air temperature is less than 50 <br />degrees F nor more than 80 degrees F. <br /> <br />B. Maintain minimum ambient temperature of 50 degrees F during installation of <br />plaster and until cured. <br /> <br />PART 2 - PRODUCTS <br /> <br />2.01 <br /> <br />MANUFACTURERS: <br />A. Rinker Stucco Mix. <br /> <br />B. Substitutions: Under provisions of Section 01600. <br />