Specifications - Laserfiche WebLink

Home Browse Search

equipment of other manufacturers and vendors which will perform or serve the requirements of the general design will be considered equally acceptable provided the material, article, or equipment so proposed, is in the opinion of the Engineer, equal in substance, quality and function. It shall not be purchased or installed by the Contractor without the Engineer's prior written approval. 25. Plans and Working Drawings: Certain plans supplied by the City accompany and supplement these Contract Documents. The City through its Engineer shall have the right to modify the details of these plans, to supplement these plans with additional plans or with additional information as the work proceeds, all of which shall be considered as plans accompanying these Specifications herein generally referred to as the "Plans ". In case of disagreement between the Plans and Specifications, the Specifications shall govern. The Contractor shall prepare whatever detailed working drawings are necessary to enable him to fabricate, erect and construct all parts of the work in conformity with the plans and Specifications. Working drawings shall include shop drawings and erection diagrams for structural steel. Working drawings shall be submitted to the Engineer in quintuplicate; two sets will be returned to the Contractor approved or showing the changes or corrections required; if changes or corrections are required, five copies shall be resubmitted until they are approved. The Contractor shall report any errors or discrepancies found in the drawings to the Engineer, who will make or approve necessary corrections. The City shall not be responsible for errors or minor discrepancies of the Contractor's drawings, even though approved, or for minor errors or minor discrepancies of the Engineer's drawings. Payment for working drawings, revisions thereof, and for copies furnished, shall be included in the amounts bid for materials or work. The Contractor shall furnish as many sets of paper blueprint copies for working drawings as the City and the Engineer may need for the work. The Contractor should allow a minimum of fourteen (14) calendar days for the City's approval of shop drawings 26. Explosives: No explosives or blasting shall be used or done in the project. 27. Subcontractors: The Contractor is as fully responsible to the City for the acts and omissions of his subcontractors and of persons either directly or indirectly employed by said subcontractor, as he is for the acts and omissions of persons directly employed by him. Nothing contained in the Contract Documents shall create any contractual relations between any subcontractor and the City. 28. Final Cleaning -up General Specifications Page 14 of 16