Laserfiche WebLink
SECTION 01600 <br />MATERIAL AND EQUIPMENT <br />PART 1 -GENERAL <br />1.01 REQUIREMENTS INCLUDE <br />A. Material and equipment incorporated into the Work: <br />1. Conform to applicable specifications and standards. <br />2. Comply with size, make, type and qualify specified, or as <br />specifically approved in writing by the Engineer. <br />3. Manufactured and Fabricated Products: <br />a. Design, fabricate and assemble in accord with the best <br />engineering and shop practices. <br />b. Manufacture like part of duplicate units to standard sizes <br />and gauges, to be interchangeable. <br />C. Two or more items of the same kind shall be identical, by <br />the same manufacturer. <br />d. Products shall be suitable for service conditions. <br />e. Equipment capacities, sizes and dimensions shown or <br />specified shall be adhered to unless variations are <br />specifically approved in writing. <br />4. Do not use material or equipment for any purpose other than that <br />for which it is designed or is specified. <br />1.02 RELATED REQUIREMENTS <br />A. Document 00700: Conditions of the Contract <br />B. Section 0 10 10: Summary of Work <br />C. Section 01030: Special Project Procedures <br />D. Section 01340: Shop Drawings, Working Drawings and Samples <br />E. Section 01720: Project Record Documents <br />F. Section 01730: Operating & Maintenance Data <br />G. Section 01740: Warranties and Bonds <br />09/03 01600 -1 03- 4138.A -R <br />