Pios & Sons - Laserfiche WebLink

Home Browse Search

' G. The Contractor shall be responsible for and bear all cost of damages that may result from the ordering of any material or from proceeding with any part of work prior to the review ' by Engineer of the necessary Shop Drawings. 1.04 ENGINEER'S REVIEW OF SHOP DRAWINGS ' A. The Engineer's review of drawings, data and samples submitted by the Contractor will cover only general conformity to the Specifications, external connections, and dimensions that affect the installation. The Engineer's review and exceptions if any, will not constitute an approval of dimensions, quantities, and details of the material, equipment, device, or item shown. ' B. The review of drawings and schedules will be general, and shall not be construed: 1. As permitting any departure from the Contract requirements; 2. As relieving the Contractor of responsibility for any errors, including details, dimensions, and materials; ' 3. As approving departures from details furnished by the Engineer, except as otherwise provided herein. C. If the drawings or schedule as submitted describe variations per subparagraph (1.05.C), and show a departure from the Contract requirements which Engineers finds to be in the interest of the Owner and to be minor as not to involve a change in the Contract Price or time for performance, the Engineer may return the reviewed drawings without noting an exception. ' D. When reviewed by the Engineer, each of the Shop Drawings will be identified as having received such review being so stamped and dated. Shop Drawings stamped "REJECTED" and with required corrections shown will be returned to the Contractor for correction and ' re- submittal. E. Re- submittals will be handled in the same manner as the first submittals. On resubmittals, the Contractor shall direct specific attention, in writing or on resubmitted Shop Drawings, to revisions other than the corrections requested by the Engineer on previous submissions. The Contractor shall make any corrections required by the Engineer. ' F. If the Contractor considers any correction indicated on the drawings to constitute a change to the Contract Drawings or Specifications, the Contractor shall give written notice thereof to the Engineer. G. The Engineer will review a submittal/resubmittal a maximum of three (3) times after which cost of review will be borne by the Contractor. The cost of engineering shall be ' equal to the Engineer's charges to the Owner under the terms of the Engineer's agreement with the Owner. ' H. When the Shop Drawings have been completed to the satisfaction of the Engineer, the Contractor shall carry out the construction in accordance therewith and shall make no ' further changes therein except upon written instructions from the Engineer. 1 06/05 01340 -3 03- 4138.B