Specifications Vol. II - Laserfiche WebLink

Home Browse Search

..., . 1"""1 . 710-5.1.3 Contrast Lines: Use black paint to provide contrast on concrete or light asphalt pavement, when specified by the Engineer. Apply black paint in 10 foot [3 m] segments following each longitudinal skip line. 710-5.2 Alignment: Apply painted stripes that will not deviate more than 1 inch [25 mm] from the stringline on tangents and curves one degree or less. Apply painted stripes that will not deviate more than 2 inches [50 mm] from the stringline on curves greater than one degree. Apply painted edge stripes uniformly, not less than 2 inches [50 mm] or more than 4 inches [100 mm] from the edge of pavement, without noticeable breaks or deviations in alignment or width. Remove and replace at no additional cost to the Department, traffic stripes that deviate more than the above stated requirements. 710-5.3 Correction Rates: Make corrections of variations in width at a maximum rate of 10 feet [3 m] for each 0.5 inches [13 mm] of correction. Make corrections of variations in alignment at a maximum rate of 25 feet [8 m] for each 1 inch [25 mm] of correction, to return to the stringline. .., . ...., . I' . -, . .., . 710-6 Contractor's Responsibility for Notification. Notify the Engineer prior to the placement of the materials. Furnish the Engineer with the manufacturer's name and LOT numbers of the materials and glass spheres to be used. Ensure that the approved LOT numbers appear on the materials and glass spheres packages. Submit a certified test report to the Engineer indicating that the materials meet all requirements specified. 1 . . , . ..., 710-7 Protection of Newly Painted Pavement Markings. Do not allow traffic onto or permit vehicles to cross newly applied pavement markings until they are sufficiently dry. Remove and replace any portion of the pavement markings damaged by passing traffic or from any other cause, at no additional cost to the Department. .., . . r"1 710-8 Corrections for Deficiencies to Applied Painted Pavement Markings. Reapply a 1.0 mile [1.0 kilometer] LOT centered around any deficiency, at no additional cost to the Department. . ., 710-9 Submittals. 710-9.1 Submittal Instructions: Prepare a certification of quantities, using the Department's current approved form, for each project in the Contract. Submit the certification of quantities and daily worksheets to the Engineer. The Department will not pay for any disputed items until the Engineer approves the certification of quantities. 710-9.2 Contractor's Certification of Quantities: Request payment by submitting a certification of quantities no later than Twelve O'clock noon Monday after the estimate cut-off date or as directed by the Engineer, based on the amount of work done or completed. Ensure the certification of quantities consists of the following: (a) Contract Number, FPID Number, Certification Number, Certification Date and the period that the certification represents. (b) The basis for arriving at the amount of the progress certification, less payments previously made and less any amount previously retained or withheld. The basis will include a detailed breakdown provided on the certification of items of payment. . .., . ..., . II . .., . , . ..., 09/09 01000-159 03-4122.F .