|
<br />
<br />2010, Orange County Convention Center, Orlando, FL – Mr. Goykhman was an Electrical Engineer for the new Variable
<br />Frequency Drives and Controls for all existing air handling units, fan, blowers and secondary chilled water pumps. SGM was
<br />the Engineer of the record and responsible for a solid commissioning plan for this 4,200,000 sq. ft. facility, the second
<br />largest convention center in the nation. The new plan was an alteration to existing facilities HVAC system. As part of this
<br />project, SGM is currently upgrading and replacing the existing multi manufacturer HVAC building automation systems (BAS)
<br />to the most current hardware and software using one manufacturer’s product. This BAS will be integrated through an
<br />enterprise level portal with remote accessibility. The goal is to integrate the campus wide buildings into one BAS web based
<br />access point.SGM is responsible for design of new controls, energy management system in compliance with codes,
<br />development of specifications, sequence of controls, design and general construction scheduling, cost estimating, and
<br />construction management.
<br />
<br />2010, Orlando Science Center HVAC, Lighting, Power, Plumbing & Fire Protection Energy Assessment, Orlando, FL
<br />– Mr. Goykhman was an electrical designer for this project to identify and recommend the best and most economical and
<br />energy efficient method of correcting the HVAC equipment located at the Orlando Science Center Complex. Responsibilities
<br />included: operation and the deficiencies associated with the operation. Inspect the facilities in areas of HVAC, lighting,
<br />power, Fire Alarm, security system, Plumbing & FP system. Review the as-build and compare with actual conditions to learn
<br />more about the operation. Attend meetings with the project team, City PM and owner’s rep to coordinate the activities and
<br />review SGM’s findings. Identify all the deficiencies associated with building’s HVAC, lighting, power, fire alarm, plumbing &
<br />FP systems. Provide a break down and inspection report including executive summary outlining the cost and improvement
<br />plan for the building operation.
<br />2010, Orange County Government Fire Station 35, Orlando, FL – Mr. Goykhman provided commissioning services for
<br />LEED enhanced commissioning, developed the owners OPR documents, reviewed drawings, during construction,
<br />developed the commissioning plan, attended construction meetings, witnessed equipment start up, performed functional
<br />performance tests on the equipment and provided Test & Balance services.
<br />2009, Orange County Government District 9 Medical Examiner’s Office Facility, Orlando, FL – Mr. Goykhman was an
<br />Electrical Engineer for the District Nine Medical Examiner’s Office which is a 41,283 SF facility that consists of three
<br />separate buildings: Medical Examiner’s Office, Morgue and Decomposition Morgue. The building is one of the first green
<br />Medical Examiner’s offices in the nation. This LEED Certified building will reduce its water consumption by 40 percent in one
<br />year with the use of low-flow fixtures and native landscaping.
<br />2007, City of Titusville, Fire Command Center, Titusville, FL – Mr. Goykhman was an electrical engineer for the building
<br />assessment report regarding the MEP conditions of the City of Titusville’s Fire Command Center. SGM determined and
<br />identified current issues for life safety, ADA, HVAC, IAQ and power/electric systems. SGM also prepared cast estimates for
<br />associated deficiencies that were outlined in the report. The City utilized the report to request funding based on the findings.
<br />2007, Orange County Corrections Central Utility Plant Chiller Expansion, Orlando, FL – Mr. Goykhman provided
<br />electrical design services for the existing central chiller plant which was required to meet the campus HVAC needs.
<br />Additionally, Mr. Goykhman provided designs for the upgrade of the building electrical and lighting systems.
<br />2007, City of Orlando Barker Park, Orlando, FL – Mr. Goykhman provided electrical design for supplementary lighting to
<br />ensure safety at night in the park. Pedestrian lights were installed along the existing sidewalks and additional safety lights
<br />were placed along a new fishing pier. New lights were executed in the old and new parking lots.
<br />2007, Orange County Kelly Park, Apopka, FL – Mr. Goykhman provided electrical engineering design services to produce
<br />a main site distribution to support the proposed maintenance building. Victor’s design included two 4” electrical PVC
<br />underground conduits with pull boxes located every 100 feet. One conduit carries wiring for power and the other carries
<br />wiring for the telecom system.
<br />2007, City of New Port Richey Recreation and Aquatic Center, New Port Richey, FL – Mr. Goykhman provided
<br />electrical design services for the renovation of the thirty-seven year old existing recreation center and addition of a new
<br />37,000 SF complex with a gymnasium, locker rooms, fitness center and meeting rooms. Exterior lighting was added for the
<br />outdoor tennis courts, parking lots, basketball courts, shuffleboard courts, and walking trails.
<br />2003, City of Maitland Public Works Yard and West Side Fire Station, Maitland, FL – Mr. Goykhman provided electrical
<br />design services for the entire Public Works Yard and West Side Fire Station. The scope consisted of four new structures
<br />including the grounds maintenance building, fleet maintenance building, offices and shops combined to make a two-story
<br />building, and the West Side Fire Station. The surrounding areas are designated for general park and recreational areas.
<br />2002, Town of Jupiter Water Treatment Plant, Jupiter, FL – Mr. Goykhman provided electrical services for the facility.
<br />This included the plant, a pump station, and associated office/lab complex. Site visits to gather data and complete the final
<br />inspection were included in the scope of services. Nestor evaluated the existing electrical distribution system in order to
<br />provide a cost estimate associated with demolition, replacement of new electrical distribution systems.
|